Phase Dimmer Kit

Circuit Phase Dimmer Kit

Phase Dimmer FEATURES

Circuit Phase Dimmer Kit

Product Overview

Control forward or reverse-phase dimmable light fixtures using the AVI-KIT-PHASE-DIM. The kit includes an Avi-on XFAC network node with 0-10V output and a 0-10V input 120V phase dimmer. Easily installed in a single 2X4 or 4×4 box. Consult maximum load ratings for sizing fixtures per dimmer. Note that LED loads are only recommended (and warranted) up to 300W, but depending on the specific fixture, it may be possible to add more.


  1. Verify that the connected load does not exceed the device ratings.
  2. Verify the dimming type of the connected fixtures and set the Forward/Reverse Phase DIP switches to match the fixture type being controlled. Do not mix different fixture types on the same dimmer. IMPORTANT: Leave the Current Source 0-10V DIP switch set to OFF.
  3. Install the XFAC and Phase Dimmer in a 4×4 or equivalent electrical box following local electrical code requirements. Connect the AC, DC power, and 0-10V Dimming wires as shown in the wiring diagram below. Cap off the Purple/White wire.
  4. When configuring the LVFA in the Avi-on network, Low End Trim must be set to 25% to avoid potential fixture flicker and to ensure expected operation of wall stations, daylight harvesting, and sensors.
  5. The unit contains a thermal protection cutoff. If the unit is overloaded, it will shut off and restart when it cools down. It is not rated for continuous overloading, however. Overloading can easily lead to premature failures and is not covered by warranty.

Phase Dimmer Kit

Select a part number from the table listed below
Part NumberSupply VoltageChannelsMax Load
AVI-KIT-PHASE-DIM120 VACSingle600w Incandescent/ 300W LED/Other

To order please contact Avi-on sales at (877) AVION-US or
for information on becoming an Avi-on partner and order details.


  • Input Voltage: 120 VAC
  • 0-10V Dimming: Load Current Sink
  • Load Capacity: 1 W min, 600W Max Incandescent/Halogen Recommended 300W Max LED and Other
  • Size: 4.00”H x 4.00”W x 1.81”D with 0.50” NPT nipple (102mm x 102mm x 46mm)
  • Mounting: External or internal box mount Weight: 8oz (16g)
  • Operating Temperature: -30F to +122F (-34C to +50C)
  • Storage Temperature: -40F to +185F (-40C to +85C)
  • Humidity Rating: 95% non-condensing
  • Radio Frequency: 2.4GHz
  • Wireless Standard: BLE 4.2 with Mesh
  • Point to Point Range*: 80ft with obstructions and 350ft unobstructed
  • Warranty: 5 years; 10 years optional
  • Regulatory: FCC: 2AFZI-AVI1010 B, IC: 20544-AVI1010 B, BQB:  D031801, DID: 86303, UL 916, C-UL, NEMA 1
*When communicating through the mesh, range is essentially unlimited (5000ft+)

featured products

The Avi-on family of products consists of load controllers, sensors, wall stations and connectivity products that work together in one big happy family.  Load controllers manage dimming, schedules, scenes, groups/zones and more while the sensors are able to detect motion with all new state-of-the-art features. These products work seamlessly with the Av-ion cloud to provide a robust wireless ecosystem.